Posted 27 October 2005 - 08:35 AM
My customer had migration from PRO-IV 4.6 to PRO-IV 5.5 ON AIX in CHAR MODE.
They have in the entry function a DISABLE(@INTERRUPT) but there is an error, the system exit pro-iv.
I tried this the following statment
Application.DisableInterrupt = TRUE
but the error is the same.
Posted 27 October 2005 - 09:29 AM
I dont fully understand the problem you are reporting here
When we migrated from 4.6 to 5.5 we had a problem which required that we add Category USER to all of the operators.
hope this helps
Posted 02 November 2005 - 09:05 AM
AIX Version 5
Pro-iv vers. 5
Kernel Version 5.1Revision :Aug 16, 05
In char mode with a GLINK, with PROTERM=DECVT220.
In the logic in in logon function there are two different users :
Ctrl-c ---> Enable ENABLE(@INTERRUPT)
When the user press "ctrl-c" the system goes to function "?" and after you can execute another function
Ctrl-c ---> Disable DISABLE(@INTERRUPT)
when then user press "ctrl-c" the system exit to connection (terminate the telnet session)
Posted 02 November 2005 - 12:10 PM
One of our customers has a similar environment and also has the ctrl-c disabled from use by the users.
It will be later this week before I can verify how they've achieved disable of the interrupt.
I suspect it has been acheived via the unix script that activates the pro-iv session. That there is a script fo use by users and a 2nd script for use by developers/administrators.
Have you also searched the forum for earlier posts on this subject? I've seen similar posts in the past.
Posted 05 November 2005 - 03:29 PM
But i found the follwing error (i think that the same ctrl-c errore) ,
When i try a connect a oracle table and oracle is down, the system return me 3 beep and exit to telent session.
I verified for the function and file category, but there are all.
Posted 07 November 2005 - 11:58 AM
Can your operators run/execute the functions @RFUNCT & @SFUNCT without problems.
@RFUNCT executes when problems occur with ORACLE tables etc., I
f your operator ID cannot access/execute @RFUNCT function due to security/categories etc., then I believe @SFUNCT is executed, @SFUNCT is generally set Exit & Error Link to log users OFF when security problems occur?
Reply to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users