AIX UNIX, PRO4 VERSION 4 R528 (AND 4.6 R 107 DOES SAME THING).
I AM CREATING A PAGING ARRAY SCREEN IN CHANGE MODE ONLY. IT HAS 2-LS WITH LS-2 BEING THE PAGING SCREEN. WHEN I TRY TO RUN MY FUNCTION I HAVE TO GO CLICK ON THE CHANGE MODE FUNCTION (OR PRESS CHANGE MODE FUN KEY FROM GREEN SCREEN) IN ORDER TO MODIFY ANY FIELDS IN MY PAGING SCREEN. IS THERE A WAY TO ALLOW IMMEDIATE UPDATE OF THE FIELDS WITHOUT HAVING TO GO INTO CHANGE MODE AGAIN. THE LS IS SETUP FOR CHANGE MODE ONLY AND DEFAULTED TO CHANGE MODE. FIELDS USE @PSEQ FOR ARRAY INDEX AND ARE SETUP FOR AUTO-REPEAT AND OVERRIDE. ANY HELP WOULD BE APPRECIATED.
Click the link below to see the new game I'm developing!
PRO4 PAGING ARRAY SCREEN
Started by
Guest_DON MAYER_*
, Jan 03 2000 08:31 PM
2 replies to this topic
#2
Chris Pepper
-
- Members
-
- 369 posts
ProIV Guru
- Gender:Male
- Location:United Kingdom
Posted 04 January 2000 - 11:32 AM
This sounds like normal PRO-IV behaviour to me. In a paging screen the main focus is on the sequence number. To access the enterable fields try the following line of logic in your DEFAULT Logic in Screen 2:
@SPSEQ = 1
@SPSEQ = 1
#3
Guest_david tuke_*
Guest_david tuke_*
-
- Guests
Posted 08 February 2000 - 11:47 AM
Here is a quote from the P4 Bulletin board
'To force ProIV to select a line automatically in a paging area, use the variable @SPSEQ. This is a
numeric system variable and by setting it to a valid line number in the paging area, ProIV will
automatically position the cursor on the first inputable field (just as if the change key had been pressed).
This value should be set in the default logic - see the manuals for further details. '
I hav enot tried this or found any reference in doc to this system variable,
but its worth a try. I often need to do this sort of thing
david tuke
'To force ProIV to select a line automatically in a paging area, use the variable @SPSEQ. This is a
numeric system variable and by setting it to a valid line number in the paging area, ProIV will
automatically position the cursor on the first inputable field (just as if the change key had been pressed).
This value should be set in the default logic - see the manuals for further details. '
I hav enot tried this or found any reference in doc to this system variable,
but its worth a try. I often need to do this sort of thing
david tuke
Reply to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
Click the link below to see the new game I'm developing!
