Hi,
Has anyone used the ProIV MFC Client to dial up and if so
what parameters did you use?
Thanks
Chris.
Click the link below to see the new game I'm developing!
3 replies to this topic
#2
Peter Davies
-
- Members
-
- 96 posts
Advanced
- Gender:Male
- Location:Bangkok, Thailand
Posted 04 May 2000 - 02:27 AM
Here's the way the client works.
1) You specify an application to do the connection - this is usually telnet.
2) The PROIV client watches this application and waits for the GUI Start.
3) The PROIV client closes the application and takes over.
You need a telnet client that can do dial up. Configure the PROIV client to kick off this instead of regular telnet and it should work.
Regards
Pete
1) You specify an application to do the connection - this is usually telnet.
2) The PROIV client watches this application and waits for the GUI Start.
3) The PROIV client closes the application and takes over.
You need a telnet client that can do dial up. Configure the PROIV client to kick off this instead of regular telnet and it should work.
Regards
Pete
#3
Guest_Doctor PRO IV_*
Guest_Doctor PRO IV_*
-
- Guests
Posted 10 May 2000 - 02:20 PM
The MFC client neither knows nor cares whether dial up is
being used.
The only requirement is a TCP/IP connection between the client and the host. This can be ethernet (as is usual, slip, ppp,loop-back, or any other transmission system.
A straight asynchronous connection without slip/ppp is not
supported.
I have used the MFC via ppp many times.
being used.
The only requirement is a TCP/IP connection between the client and the host. This can be ethernet (as is usual, slip, ppp,loop-back, or any other transmission system.
A straight asynchronous connection without slip/ppp is not
supported.
I have used the MFC via ppp many times.
#4
Guest_Kester_*
Guest_Kester_*
-
- Guests
Posted 11 May 2000 - 02:14 AM
We are using this type of communication between one Polish company customers and PRO-IV 4.6 NT server via internet for more then one year. You can connect directly to the NT server or via linux server and telnet. If anyone is interested in how the MFC should be configured please e-mail me and I will send the information.
Kester
Kester
Reply to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
Click the link below to see the new game I'm developing!
